Ipad Security Display Stand/Ipad Alarm Display Stand

1. Competitive price &high quality 2. New style &store available 3.Perfect anti-theft alarm function

It  can be used to display  tablet PCs. It reduces friction with silicon anti-slip mat sticked to aluminum stand.

When the goods are forcibly taken away, the display stand will alarm special sound like the police siren, which can be clearly heard even in noisy conditions to achieve alert effect while warning the salesmen. The salesman need to press the “unlock key “aiming at the anti-theft display stand to relieve the alarm, it is convenient like the TV remote controller.

It provides better experience and feelings for customers who`ll be left in the store for an average 3 to10 times extension time, and solve the problem in counter sales that salesmen are too busy or impatient to deal with the customers and hence the loss of them ,thus creating more selling surprise.

Aluminum stand appearance parameters:L145mm×W130mm×H210mm / L160mm×W155mm×H185mm

Ipad Security display holder with Alarm deviceIt is the most innovative security alarm display system.(1) Prevent your displaying electronics from shoplifting(2) It's convenient for the customers to see tablet PC and ipad in the exclusive shops(3) With the connection of the electronics to the display shelf, security display holder can realized immediately while removed.(4) Anti-theft alarm for laptop and ipad.

Perfect Alarm FunctionThe security alarm display device when it happens as below:(1) Remove the base of alarm device,it will alarm

(2) Remove the sensor,it will alarm

(3) Cut the lanyard,it will alarm

(4) Cut the spring wire(5) Put out the connector

(6) When remove or pry the stand on the bottom, the anti-theft function also can be available.

 

 

Alarm solutionThe indicator light will turn red immediately when alarm. Use the remote controller to send signal to the host within 10mm, press ''lock'', and the host indicator light turn green .

 

Product Installation(1) Fix the holder on the exhibition counter

(2) Tear off the plastic film, and then paste the holder.

 

 

 

 

 

 

Operational steps:

 

1. Connect the power charge for host when it is low power

 

(the LED will turn green when charging and extinguish when it is finished)

 

2. Turn on bottom button and the LED flash blue light (the holder works)

 

3. Remote controller aim at receiver within 15mm, press the button is ok.(the D?D?voice will be heard when press the button)

 

4. Tear off the plastic film that close to the 3M sticker adhesive

 

5. Put the 3M sticker adhesive on the smooth surface(press tightly more than 10 seconds)

 

6. Tear off the film from the small contactor.

 

7. Put the small contactor on the cell phone(press tightly more than 10 seconds)

 

The holder will issue D?D? voice when above operation is finished, and the LED flash blue light every five seconds.

 

Ipad Security Display Stand/Ipad Alarm Display Stand